What are they and how can they save you money?
Our coatings are liquid applied, fully adhered, "rubber like" elastomeric membranes. They can be applied as part of a roof or wall system during the initial installation stage, or retrofit as a maintenance application.
The versatility of our coatings allow them to be used on virtually any clean, dry and mechanically sound substrate, including but not limited to built-up, modified bitumen, metal, asphalt shingles, polyurethane foam, brick, concrete, cinder block or wood.
Money saving Features
When applied correctly, our coatings will provide a waterproof protective barrier on all roof or wall applications. These coatings are desinged to protect from -30 deg F to 180 deg F and they will stand up to snow, ice, driving rain, salt spray and blowing sand.
Savings: reduce water related damage
These coatings are designed to relfect up to 90% of the heat from the sun. This reduction in the heat load on a roof or wall will translate into savings on air conditioning costs. It will also greatly extend the useful life of a roof or wall by limiting expansion and contraction, which is a cause of roof and insulation failure.
Savings: reduce energy costs
Application Cost Savings
Because there is no heavy equipment or materials which need to be carried onto the roof, the entire roof coatings job can be done with as little as one installer. Nothing has to be nailed, screwed, torched, glued or cut. This will significantly reduce application time and slash cost relating to man hours.
Savings: more economical than re-roofing
Cost Efficent Maintenance
Once the coating is applied, there will be no exposed metal to rust, built-up roofing to dry out, seams to pull apart or single-ply membranes to disintegrate. Since these coatings will reflect up to 90% of the heat from the sun, the thermal related stress the roof experiences each day will be greatly reduced. This reduction in heat stress will extend the life of the roof. When maintenance is needed the coating can be easily re-applied after the repairs are completed.
Savings: reduce labor costs
These coatings are 100% acrylic elastomeric coatings. They do not contain any plasticizers which causes chalking and makes the coating dry out over time. The excellent elongation properties allow the coating to remain intact while the building expands and contracts.
Savings: extends the life of the roof